Home > Error Code > Whirlpool Duet Error Code F27

Whirlpool Duet Error Code F27

Contents

Replace Central Control Unit if drum is not moving. Read all instructions and documentation that comes with the appliance, thoroughly.Rule out the simple common sense things first. Plug in washer or reconnect power. 4. F42 MOTOR CONTROL UNIT FAILURE - REPETITIVE UNDERVOLTAGE The Motor Control Unit continuously checks for voltage. have a peek at these guys

The failure will be reset after running the Diagnostic Test Program. 1. Check Wire Harness connectors to the MCU, the motor, and Central Control Unit (CCU) Check the Drive system for any worn or failed components Check MCU Check CCU Check Motor Check Replace CCU board. Check valve for continuity (abnormal = infi nity). 2.

Kenmore F27 Error

The drive motor must be hooked up properly or a "CE" error will occur. • Drive motor thermal protector has opened. • Motor controller is not powered or fuse has opened. Check resistance of heating element, if present on this model. (abnormal = infinity) 4. Check wire harness connections to the MCU, the motor, and Central Control Unit (CCU). Verify there is not a siphon problem. 3.

Check the drain hose and make sure it is not plugged or kinked. 2. The doorswitch may cause an interference for the powersupply of the MCU. Sud SUDS LOCK (OVERDOSE OF DETERGENT DETECTED DURING THE WASH CYCLE) If suds are detected continuously by the pressure switch during the drain or spin phases, the washer will fill 4 F22 DOOR LOCK ERROR After 6 failed attempts to lock the door.

Search for a fix How can I fix myWashing Machine? Whirlpool Front Load Washer Error Codes My dryer finishes after 1 min of cycle ?(Added 3 min/s ago) Makita dc18ra?(Added recently) How to fix?(Added recently) Miele G694 SC Plus -Outlet Blocked?(Added recently) can some one help me F32 PRESSURE SWITCH FAILURE If there is no electrical supply to the Pressure Switch from the CCU or if the Pressure Switch contacts are worn out, then a Pressure Switch Failure Door switch open while door is locked. 1.

Any other tips? Sign in to add this video to a playlist. If “Sud” is displayed a potential suds lock is detected. Check the drain hose and make sure it is not plugged or kinked. 2.

Whirlpool Front Load Washer Error Codes

Check the wire harness connections to the Motor Control Unit, Central Control Unit, and Interference Filter. 3. http://forum.appliancepartspros.com/washer-repair/191976-error-code-f27.html F30 DISPENSER SYSTEM ERROR When the dispenser motor cannot be driven to its proper position. 1. Kenmore F27 Error Check the wire harness connections to the door switch/lock unit and Central Control Unit (CCU). Whirlpool 6th Sense Washing Machine Error Codes Watch Queue Queue __count__/__total__ Find out whyClose Fix F-21 F-33 Whirlpool Duet Sport Drain Pump motor problems James Poag SubscribeSubscribedUnsubscribe8989 Loading...

Potential Causes • Check Wire Harness connections to the MCU, the motor, and Central Control Unit (CCU) • Check Drive belt • Check MCU • Check Motor • Check Wire Harness More about the author Replace MCU board. A power glitch may cause this error. This should clear the unit of the excess detergent. 1. Whirlpool Washer

F20 NO WATER DETECTED ENTERING MACHINE OR PRESSURE SWITCH TRIP NOT DETECTED. Check/clean drain pump filter of foreign objects. 5. Check wire harness connections between the drive motor and the Motor Control Unit (MCU), and b etween the MCU and the Central Control Unit (CCU). check my blog Answers Who answers the questions?

Washer will sometimes complete a full cycle but rarely....what now? Verify CCU operation by running a Diagnostic Test or any cycle. View Cart| Contact Us| Track Order| Customer Service| My Account Discuss Error Code F27in Washer Repair. "For the Look for obstructions in the clean-out trap and impeller area of the pump. 4.

Unplug washer or disconnect power. 8.

Here is a link for the website: Sears Home Services . SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. Replace Central Control Unit if drum is not moving F71 USER INTERFACE HEARTBEAT FAILURE If a Central Control Unit Heartbeat Failure is displayed, no communication is detected from the User Interface Verify the shipping system including shipping bolts, spacers and cables are removed. 2. F31 MCU FAILURE If the heat sink gets too hot, the Motor Control Unit (MCU) will stop the motor, the MCU will communicate this failure to the Central Control Unit (CCU),

Refer to the Water Temperature Sensor section. They use the status lights on the touchpad/LED. Check door switch contacts. 4. http://3cq.org/error-code/whirlpool-duet-02-f-error-code.php Replace CCU board.

I can't open door to get model number. Cleaned drains and replaced pressure switch and now get F27 error code.