Home > Western Digital > Western Digital Cable Test Error

Western Digital Cable Test Error

Check Floppy and use appropriate diagnostic utility 209 Self Test Failed To Run SMART Self Test failed to start when executed. where would I get the earlier, possibly working version of the diagnostic tools? Re-Test Drive 116 IDNF Error Address Not Found Error. No Errors 0001-0015 SMART Error Self-Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command. have a peek here

Replace the drive if the repair fails. If ECC occurs, use Data Lifeguard for additional error correction. This may be due to a media error. Drive should be replaced. https://support.wdc.com/knowledgebase/answer.aspx?ID=11711

This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. ECC is a hardware correction technique that corrects errors. The drive should now be defect free. There has to be some glitch in the 1.17 code that is causing Lifeguard to not play nicely with Windows disk management or the actual hard drives themselves.   I already

Using DX58SO motherboard, I7 720 processor, primary drive is intel SSD, Second drive is the WD1001FALS Caviar Black 1 TB Drives appear to be working correctly now, but I've only just Several instances of information on data positioning and location could not be found. Re-test Drive 145 FULL STROKE ERROR Error encountered during full stroke seek. Re-test Drive 148 Not Selected Drive not selected.

Replace Drive 217 2-9 SERVO Errors SERVO 2-9. The drive is defect free. At least ten ECC errors have been detected. https://community.wd.com/t/11-cable-test-write-sector-error/13087 It also may be due to a defective connection.

This may be due to a defect with the drive or a bad connection. Re-Test Drive 11 Cable Test Failed Failure during cable test. This may be an anomaly or a defect with the drive. Does anyone from Werstern Digital read these forums?

This may be due to a media or read error. https://www.windowsbbs.com/threads/western-digital-external-drive-read-diagnostics-sector-error.87937/ This will void any warranty on the drive and enclosure. Any sector errors should be shown here. D_Know_WDOct 31, 2014, 7:58 AM I am glad you were able to sort the issue out and recover the data.Cheers,D_Know_WD fzabkarNov 2, 2014, 4:13 PM Another Linux tool is ddrescue.

No Errors 101 Unknown Error An unknown error has occurred during testing. http://3cq.org/western-digital/western-digital-test-error-code-08.php I know there is something wrong with my  hdd, I am running vista 32 bit business.  Two days ago, when I turned on my computer, it said "A Disk Read Error No other software can help. Replace Drive 215 2-9 IDNF Errors Identified Data Not Found (IDNF) 2-9.

had tried to chg cables still same... Check connections and retest. Replace Drive 219 Drive Cable Error Failure during cable test. Check This Out ended up geting help from data recovery center.

Replace Drive 211 2-9 Uncorr ECC Errors Error Correction Code (ECC) 2 through 9. Several instances of track information could not be found. Track 0 on the drive must be accessed to perform parts of various internal tests.

That is interesting.

Re-Test Drive 104 Drive Not Ready The drive did not properly respond to test commands. If the above theory stand still as true, in that case it is applicable for all media read devices right ?So only asked if anything is missing from technical perspective which Replace Drive 0009 - 0014 SMART Error Self-Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command. The drive has not responded back in the time allotted.

Replace the drive if the error repeats. karthik24sOct 18, 2014, 10:25 AM Agera One said: Nope, there are no other ways to copy the file. Re-Test Drive 121 Servo Error Servo error. http://3cq.org/western-digital/western-digital-passport-cable-test-read-diagnostics-sector-error.php I already ruled out a bad CD\DVD or Burn as I also reproduced this issue using two different machines and after verifying the burn was successful.

i decided to back up the data and format the drive, as soon as i plugged to my desktop i got a message saying that the drive needs to be scanned. anybody there Bill_S 2010-07-22 17:13:40 UTC #3 Have you tried changing the cable? The drive has failed and must be replaced. Try connecting the hard drive to any other computer or laptop and copy the files you need.

if so they should be concerned about the bad publicity, I now have three 500g drives and I am begining to wish I had another Mfg... Please re-test the drive with Data Lifeguard. Non-WD drives are not supported. Retest.

Drive should be replaced. Right click on it and select "Run as Administrator".Type, chkdsk X: /r and press enter (where X is the letter assigned for that drive in windows explorer)This might take over 15 Retest after checking the connections. Check cabling and retest.

Drive should be replaced. This may be due to a media error. Replace Drive 204 DRM Attribute too low after media scan. Replace the drive.

This error can occur on non-Western Digital drives. Non-WD drives are not supported. Replace Drive 163 Unknown Error Queued command timed out. Replace the drive.