Home > Western Digital > Western Digital Diagnostic Error Code 0007

Western Digital Diagnostic Error Code 0007

Contents

Check cabling and retest. Re-test Drive 141 UNKNOWN ERROR An unknown error has occurred during testing. I've tried two other forums for help on this one but none have been able to. If ECC occurs, use Data Lifeguard repair option for additional error correction. have a peek here

Reference: http://support.microsoft.com/?kbid=311902 Reference: http://forum.ts.fujitsu.com/fo.....38;start=0 Need to procure another brand of HD. This error may also appear if the floppy has been infected by a hidden virus. Computers with S.M.A.R.T. Check cabling & retest.

Seagate Tools

Self-Monitoring, Analysis, and Reporting Technology (SMART). Re-test Drive with appropriate diagnostic utility 205 Aborted By User Test was aborted by the user (Alt-X pressed during a test). Re-Test Drive 257 ECC 2-9 Error Correction Code. If ECC occurs, use Data Lifeguard repair option for additional error correction.

What is your old drive model #? Drive should be replaced. Rakinos, Apr 25, 2008 Rakinos, Apr 25, 2008 #1 Nov 10, 2010 #2 Cerulean [H]ardForum Junkie Messages: 9,260 Joined: Jul 27, 2006 New Western Digital Blue 160GB IDE HDD and I Several instances of information on data positioning and location could not be found.

Reports: · Posted 5 years ago Top ispalten Posts: 6259 This post has been reported. Chkdsk Re-Test Drive 102 Seek Timeout A Seek command did not complete in the time allotted for its completion. The automatic repair feature can attempt a repair if possible. You never know when one will leave you.

ECC is a hardware correction technique that corrects errors. If the error repeats, replace the drive. Check your floppy and retest. oxter 2011-08-08 12:47:11 UTC #4 What RMA you did?

Chkdsk

Retest after checking the connections. The drive has not responded in the time allotted. Seagate Tools Can anyone, please, help me out? Retest the drive.

The Identify Drive Command has not received an acceptable response from the drive. navigate here This is a monitoring system, which stores all errors, retries, and power on hours. There were media errors that were within the repair capabilities of diagnostic utility. Replace Drive 581 Write Fault When either writing zeros or relocating a sector, the Write command failed.

Check cable and retest. Do you have other drives on the same cable as the IDE drive? Replace Drive 256 ECC 1 Error Correction Code. Check This Out to report if a drive has failed, it must be enabled as a system option.

There may be repairable media errors on a platter. Using the site is easy and fun. This may be due to a media or read error.

Re-test Drive 206 Memory Allocation Error Unable to allocate memory for program structures.

Replace drive if unable to correct error 118 DAM Error Data Address Mark (DAM) Error. Replace the drive if the error repeats. Replace Drive 0009 - 0014 SMART Error Self-Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command. The same utility and the original code used to lock the drive are necessary to unlock this drive.

Re-test the drive with Data Lifeguard. Retest after checking the connections. SERVO is data on track location. this contact form This error may also be related to memory issues.

I can't explain it. The following is an excerpt from Wikipedia. Replace the drive if the error repeats. Retest and replace the drive if the error repeats.

I did ask about returning a drive that now shows no errors and they said there would be no problem. It also may be due to a defective connection. This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. I had them confirm this.

Re-test Drive 162 READY EXPECTED Timeout from checking busy bit. One instance of information on data positioning and location could not be found. Replace the drive if the error repeats. ECC is a hardware correction technique that corrects errors.