Home > Western Digital > Western Digital Diagnostics Error 0223

Western Digital Diagnostics Error 0223

Re-test Drive with appropriate diagnostic utility 204 Missing Log File The log file that existed at startup of diagnostic utility has been moved or no longer exists. SERVO is data on track location. Re-test Drive 134 Busy Timeout Timeout from checking busy bit. Several instances of information on data positioning and location could not be found. http://3cq.org/western-digital/western-digital-error-0223.php

There were media errors that were within the repair capabilities of diagnostic utility. A number of ECC errors (between 2 through 9) have been detected. Re-test Drive 145 FULL STROKE ERROR Error encountered during full stroke seek. Retest the drive with Data Lifeguard. https://support.wdc.com/knowledgebase/answer.aspx?ID=11711

Ten or more instances of information on data positioning and location could not be found. There are too many errors detected on this drive to be repaired. Replace the drive if the error repeats.

The drive has not responded in the time allotted. Replace the drive if the error repeats. It also may be due to a defective connection. Continue to test or exit the test.

But I need to give them a credit card number for collateral since they want my old drive back. Re-Test Drive 20 Failed to Delete Partitions A Device I/O Control command during the test has failed. With quick scan I got error code 0007 SMART hard drive failure. Replace your cable and retest.

May need to run DLGUDMA to set the drive to a slower speed or replace the IDE cable. Ten or more instances of information on data positioning and location could not be found. Return to WDC.com WD Community Contact Us English Product Support My CloudMy BookMy PassportWD Elements & WD TVInternal DrivesWDLabsLegacy & Other Products Downloads WD Software Product Firmware Product Downloads Warranty & This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection.

Retest the drive. https://community.wd.com/t/error-0132-and-using-proper-wd-data-lifeguard-diagnostic/14904 Re-test the drive with Data Lifeguard. Dlgdiag extended tests take 6+ hours and always come back asking me to repair errors and code 0223. Use the appropriate version.

Re-Test Drive 105 BUSY GLITCH The drive did not properly respond to test commands. http://3cq.org/western-digital/western-digital-hard-drive-error-code-0223.php Check cabling and retest. You may need to rescan to ensure that the repairs were effective. Generated Tue, 01 Nov 2016 17:26:57 GMT by s_fl369 (squid/3.5.20) ThemeWelcome · log in · join Show navigation Hide navigation HomeReviewsHowChartsLatestSpeed TestRun TestRun PingHistoryPreferencesResultsRun StreamsServersCountryToolsIntroFAQLine QualitySmoke PingTweak TestLine MonitorMonitor GroupsMy IP

It also may be due to a defective connection. This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. Please re-test the drive with Data Lifeguard. http://3cq.org/western-digital/western-digital-error-code-0223.php Drive should be replaced.

It is also possible to see this error on defective Western Digital drives. Rate Changes 12/1/16 [OptimumOnline] by dm145400. The information file, which holds the data pertaining to this drive, is corrupted or missing.

Re-test Drive 220 Drive is Locked Security feature of the drive reports locked status.

ForumsJoin Search similar:[hard drive] Long Hard Drive Activity Freezes WindowsPC won't post after WinXP activationConnection to Sprint 4G LTE[hard drive] Western Digital 1tb external hard drive in readonly[WIN7] Calculator issue[hard drive] Adobe Flash Player security update - October 26, 2016 [Security] by chachazz252. So, I downloaded the WD Data Lifeguard Diagnostic software, had to use the one with the ISO Another anyway, can someone please assist me in figuring out what might be happening, Useful Searches Recent Posts Menu Forums Forums Quick Links Search Forums Recent Posts Menu Log in Sign up AnandTech Forums: Technology, Hardware, Software, and Deals Forums > Hardware and Technology >

Will await your help, thanks so much for listening, appreciate any info, DR Awopero 2011-11-21 14:13:50 UTC #2 it means that you have the wrong utility for this hard drive  Quote: Replace the drive. This may be an anomaly. this contact form There may be media errors present on this drive.

This may be due to a media or read/write error. Re-test Drive 142 TK-TK SEEK ERROR Error encountered during track-to-track seek. They are sending me one. Re-Test Drive 16 Random Read Error A read command during the test has failed.

This is the pretest initialization code which indicates a drive is ready to be tested, but has not yet been tested. Drive should be replaced. Create and use a new DLG Tools diskette. Retest after checking connections.

Replace the drive if the error repeats. Replace the drive if the error repeats. This may be due to a media or read/write error. Re-Test Drive 108 Seek Not Complete A Seek command did not complete in the time allotted.

Smart status was reporting zero after the last time I ran dlgdiag in the other system, 3/4 of the way through chkdsk /r current pending sector count went back up to Re-Test Drive 104 Drive Not Ready The drive did not properly respond to test commands. Replace the drive if the error repeats. Track 0 on the drive must be accessed to perform parts of various internal tests.

Privacy Policy Terms of Use Trademarks Select your Language Language 中文(繁體) 中文(简体) Čeština Deutsch English Español Francais ελληνικά Italiano 日本語 한국어 Polski Português РУССКИЙ Türk Return to WDC.com WD Community Contact There may be repairable media errors on a platter. acrufox 2011-03-15 05:38:27 UTC #5 Would that be the same as booting off a pen drive with dos?