Home > Western Digital > Western Digital Error Code 0225

Western Digital Error Code 0225

Replace the drive." http://support.wdc.com/techinfo/general/errorcodes.asp JEFFRO503 View Public Profile Find all posts by JEFFRO503 (#8) TruMutton_200Hz Ancient Guru Videocard: 820M/2GB Processor: i7 4510U Mainboard: Asus R510LDV Memory: Check again in a view weeks and if those attribute values for 197 and 5 are still 1 and 0 or even 0 and 1 you should be okay. The drive is defect free. This means two things. http://3cq.org/western-digital/western-digital-0225-error-code.php

Isn't it supposed to be testing the drive itself? Drive should be replaced. What else should I do to check the status of this drive? If you run chkdsk on it (if you haven't already) it will mark the cluster as bad that the bad sector is in and not use it. https://support.wdc.com/knowledgebase/answer.aspx?ID=11711

Replace the drive if the error repeats. Should I replace it? One is that the stock of Good Spares is getting low, so continuing without remedial action risks getting to the point that there are no more Good Spares to use, and No Errors 100 No Errors Found Successful operation.

Ten or more instances of track information could not be found. Computer works normally. The drive is defect free. It just hangs around ~10% of scanned sectors and completely stops.

Check cabling & retest. All Rights Reserved Theme designed by Audentio Design. Retest after checking the connections. This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection.

Re-test Drive 141 UNKNOWN ERROR An unknown error has occurred during testing. Test Time: 18:30:24, October 03, 2008 It doesn't even want to finish the test. Some research about this type of error marks the possible culprits to be either the bios not recognizing the hard drive, or the boot sector being corrupted. I still have to get a mother board , CPU , another video card and possibly replace this new ram as well.

The new one is newer so it needed a new CPU and DDR3 RAM as well. http://www.tomshardware.com/forum/282166-32-data-diagnostics-chkdsk-conflict This may be an anomaly or a defect with the drive. SERVO is data on track location. Status code = 07 (Failed read test element), Failure Checkpoint = 65 (Error Log Test) SMART self-test did not complete on drive 1!

There may be repairable media errors on a platter. navigate here Retest the drive. But based on what you've said, and the results I got from the WD Diagnostics utility, I think it would be the wisest option to save up a bit longer and To some degree, that judgment is up to you - how much risk can you tolerate?

At least ten errors have been detected. Then it will replace that Sector with one of the Good Spares, writing the recovered data to that, and mark off the questionable sector as Bad and never to be used Error: (10/04/2014 09:54:43 AM) (Source: Microsoft Antimalware) (User: ) Description: The support for your operating system has expired. Check This Out System errors: ============= Error: (10/04/2014 03:16:36 PM) (Source: Microsoft Antimalware) (User: ) Description: The support for your operating system has expired.

This may be due to an internal error or to a failed connection which did not allow the interrupt command to be sent to the drive properly. Re-test with appropriate diagnostic utility 222 Drive Failed the Test Self-Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command. Microsoft Office Sessions: ========================= Error: (10/03/2014 08:24:12 PM) (Source: ESENT)(User: ) Description: wuaueng.dll3752SUS20ClientDataStore: F:\WINDOWS\SoftwareDistribution\DataStore\Logs\edb.log-1032 (0xfffffbf8) Error: (10/03/2014 08:24:12 PM) (Source: ESENT)(User: ) Description: wuauclt3752F:\WINDOWS\SoftwareDistribution\DataStore\Logs\edb.log-1032 (0xfffffbf8)32 (0x00000020)The process cannot access the file

The drive is toast, right? #1 lakedude, Dec 5, 2012 Fardringle Diamond Member Joined: Oct 23, 2000 Messages: 8,007 Likes Received: 6 Western Digital's Diagnostic Error Codes list says that

I ran the SMART diagnostics (extended test) and got the results below. Please contact the system vendor for the above-mentioned information. The Guru of 3D, the Hardware Guru, and 3D Guru are trademarks owned by Hilbert Hagedoorn. -- Aria -- Dark -- Fast Contact Us - The Guru of 3D - Archive The risk / problem with this process is threefold.

It also may be due to a defective connection. Background: on modern HDD's the PC board in the unit contains a small microprocessor, a small BIOS with pre-programmed tasks, and some memory of a few types. If DLG is unable to detect your drive, then temporarily reconfigure your SATA controller in your BIOS setup for legacy or IDE compatibility mode. http://3cq.org/western-digital/western-digital-hard-drive-error-0225.php The open file operation will fail with error -1032 (0xfffffbf8).

There are too many errors detected on this drive to be repaired. Re-Test Drive 16 Random Read Error A read command during the test has failed. Re-Test Drive 103 Write Fault Error A Write command during the test has failed to complete. Re-test Drive 144 THIRD STROKE ERROR Error encountered during 1/3 stroke seek.

SMART values, bad sectors, reallocated counts etc. Replace the drive if the error repeats. Re-Test Drive 18 Read Verify Sector Ext Error A Read Verify Sector Ext command during the test has failed. Replace Drive 458 IDNF 10+ Identified Data Not Found.

Re-test Drive 206 Memory Allocation Error Unable to allocate memory for program structures. Re-Test Drive 112 IRQ Timeout Interrupt ReQuest Interrupt signal not received. Data Lifeguard Diagnostic for DOS (CD) Quick Test: Test Completed With Read Element Failure Error/Status Code: 0007 Extended Test: Too Many Errors Found - Please Contact Tech Support Error/Status Code: 0225 Today when I booted up Win XP, I got an error message I'd never seen before.