Home > Western Digital > Western Digital Error Code 0257

Western Digital Error Code 0257

Re-Test Drive 18 Read Verify Sector Ext Error A Read Verify Sector Ext command during the test has failed. Data sent between the host computer and the drive has been corrupted. There are so many products to choose from nowadays that you maybe confused to understand which product is the correct product for you. This may be an anomaly. have a peek here

Replace Drive 161 RESET SIGNATURE The drive did not properly respond to test commands. Re-Test Drive 104 Drive Not Ready The drive did not properly respond to test commands. Drive should be replaced. Replace Drive 456 IDNF 1 Identified Data Not Found. https://support.wdc.com/knowledgebase/answer.aspx?ID=11711

Batch Insert to improve performance 5. The drive has not responded to the SMART test request. Replace Drive 200 Drive Not Tested Supported WD drives are initialized with this status.

I doubt any >other hard drvie maker will do this, at least not without giving one >the run around. >I would always recommend WD drives to everyone. Actually, >good customer service usually sells a company's product. >Regards, And thats the final word. A happy ending, but something is amiss. Replace Drive 458 IDNF 10+ Identified Data Not Found.

Replace the drive if the error repeats. Retest after checking the connections. Re-test Drive 201 Non-WD Drive The drive does not have a WD serial number. http://www.manualslib.com/manual/534908/Western-Digital-Wd-Quick-Tester.html?page=17 To start viewing messages, select the forum that you want to visit from the selection below.

Maybe we could email you one. :-) Sorry I can't be more help. 0 Message Author Comment by:KSCHADHA1998-09-19 OH Jimat thanks a miilion for all the time .. This error can occur on non-Western Digital drives. It may also be due to a defective connection. Join the community of 500,000 technology professionals and ask your questions.

Please contact the system vendor for the above-mentioned information. http://www.dslreports.com/forum/r3821712-New-used-hard-drive-error Back in the day (1996) when I had to replace WD drives, it took a month and some days to get a drive back from them. Re-test Drive 144 THIRD STROKE ERROR Error encountered during 1/3 stroke seek. Ten or more instances of track information could not be found.

The same utility and the original code used to lock the drive are necessary to unlock this drive. navigate here Replace the drive if the error repeats. So, I rebooted, hoping to get into Windows XP and get my computer up and running again, NOT, it didn't work. The information file, which holds the data pertaining to this drive, is corrupted or missing.

next your bios does not see the drive now.What is the board give details please.as stated above we need to flash the bios first.We cannot proceed with this unless the bios Some are able to access and trouble shoot the disk using its onboard command set. Re-Test Drive 111 DIAG COMMAND ERROR The drive did not properly respond to test commands. Check This Out It will tell you if the drive is still under warranty, which it should be if it is only 2 years old. #5 Pariah, Feb 21, 2003 Jhill Diamond Member

This may be an anomaly or a defect with the drive. Self-Monitoring, Analysis, and Reporting Technology (SMART). This error may also appear if the floppy has been infected by a hidden virus.

One instance of information on data positioning and location could not be found.

If the error repeats, replace the drive. Don't think you can buy a better drive. Re-test Drive with appropriate diagnostic utility 204 Missing Log File The log file that existed at startup of diagnostic utility has been moved or no longer exists. To run in ATA 66 and ATA100 rates, an Ultra ATA 80 -conductor cable must be used.

western digital 12. My WD 1.2 crashed after a dozen months. There were media errors that were within the repair capabilities of diagnostic utility. this contact form Re-test Drive 137 Relocated Sector Sector Relocated.

Covered by US Patent. You may need to rescan to ensure that the repairs were effective. This error may also be related to memory issues. Replace the drive if the error repeats.

Re-Test Drive 4 Open Drive Failure Cannot communicate with drive. I called WD support on Tuesday so I am happen with the turnaround time. Replace Drive 227 SMART Not Supported Self-Monitoring, Analysis, and Reporting Technology (SMART) Certain older drives do not support SMART. Mine also failed - Does anyone have a good 1.6Gb drive??

This may be due to a media error. Replace Drive If an error code is encountered that is not in the list above, please Contact Us for additional troubleshooting. If they really are this fast then I guess they are getting better (because of new RMA facility?)Edit:So how do I ship this thing to them? Please ensure that you are using the appropriate version of diagnostic utility.

The automatic repair feature can attempt a repair if possible. WD Internal Drives Desktop & Mobile Drives psongman 2011-11-20 07:59:20 UTC #1 HI, I am sure this has been mulled over a few times here but I can't narrow down the Replace the drive if the error repeats. Check the device connections.

Replace your cable and retest. Public Mobile $40 - 4gb LTE [CanadianBroadband] by rainor94322. I know what the primary and secondary IDE controllers are.. Top Western Digital Replacement of Defective Drives by d.. » Fri, 28 Feb 1997 04:00:00 >>If the hard drive passes, a screen message will say so.

Re-test the drive with Data Lifeguard.